Reliance Industries Complaints & Reviews

sir i want to take training in your company.i am student of B.E. in information technology.

Respected Sir,
I am a student of B.Tech electrical & electronics. I am going to complete my degree in June 2009 from AAI-DU, Allahabad. I want to start my carrier with your company as a engineer.
I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad".

Thanking You and looking for
a positive response from you.
Amit Sharan

Dear Sir,

This is in reference to getting electricity pole installed in Malviya Nagar, regarding the same i will like to tell that i am a resident of 301, Malviya Nagar, Allahabad-211003.

Their is an electricity angle with high tension wire installed, nearby to above mentioned address, it's a place from where on average 1000 of people move everyday, that angle is some 50 years old and could lead for any major accident anyday.

Sir, we have already complained this matter to Uttar Pradesh State Electricity Board, and they came also for installation of POLE, but due to some obstinate and political party members residing there, simply for the sake of their own & personal benefit are not allowing UPSEB team to get the POLE installed, and are threatening them.

As above to avoid any major accident, will request for your interference, so that proper safety could be given to UPSEB electricity pole installation team, and consequently installtion of POLE.

Cansome one please pass this message to electricity department for installation of a pole, instead of angle to avoid any major accident, which seems to be most likely.

Regards
Manish Mishra
ct: [protected]

Dear Sir,

I want to make my career in RIL allahabad company So for this what should i do.
My qualification is Diploma Mechanical & i have done my diploma in 2008 from Ghaziabad polytechnic .

Respected Sir,

I am a student of B.Tech MAN MADE FIBRE TECHNOLOGY.I want to start my carrier with your company
as a TTEXTILE ENGINEER.
I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad".

Thanking You and looking for
a positive response from you.
AMRESH KAMAR

Dear Sir,

With reference the job for purchase deptt, present time I am working with Krishna Maruti Ltd Gurgaon.

I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad".

S.K.Dubey

M[protected]

Mr,
Arun pandey I know you from long time when i was a junior engg in your dept.I left the company after two year and joined in gulf country.You are the person who never willing to do the jobs, not only this you have aways destructive nature, always non cooperative
please improve himself and if not getting job please contact to me, Iam in Oman
my mobile number is[protected]
yours
Dharmendra Pandey, HSE Manager

SUNIL KUMAR DWIVEDI
Asst. General Manager (EHS)
Nalwa Steel And Power Ltd.
(O. P. Jindal Group of Companies)
Taraimal, Raigarh (C.G.) 496001
MOB. +91-[protected]
Email – [protected]@gmail.com
[protected]@nalwa.com

R E S U M E


OBJECTIVE: - Looking for challenging position that can effectively utilise my potential and enable me to grow professionally and personally.

PROFESSIONAL MISSION:

“To establish safety, environment & Health/training department as a Profit Centre for Industry by creating value through safe & eco-friendly work environment & right human attitude to achieve the goal of loss –prevention & cost-effective utilization of resources.”


SPECIFIC JOBS HAD BEEN/ BEING HANDLED BY ME :

• SAFETY INSPECTION, ACCIDENT INVESTIGATION, SAFETY PERFORMANCE EVALUATION, JOB SAFETY ANALYSIS, SAFETY AUDIT, HAZOP STUDY, RISK ASSESSMENT&ENVIRONMENTAL AUDIT, STATUTORY REQUIREMENT’S COMPLIANCE, ACCIDENT REPORTING TO GOVT. AUTHORITIES, MOTIVATIONAL / SAFETY PROMOTIONAL ACTIVITIES.

• Designing and Imparting Environment & Safety Training for Officers, Workers and Contract Labours. Updating of ON SITE EMERGENCY PLAN & conducting Mock Drills.

• Formulating and updating various safety systems e.g.- permit to work, safety tags system, examination of lifting devices & pressure vessel etc.

• Certified auditor by DNV, Netherlands (secured 76% marks) for Occupational Health & Safety Mgt. Under OHSAS- 18001

• Co-ordination with occupational health center for job site monitoring & Occupational health check up & biological monitoring of employees

• Liaison with Asst. Director of Factories, ESI Office, Dy. Labour Commissioner ‘s office regarding safety related matters

• Training & Co ordination for Documentation etc. regarding OHSAS – 18001 (Occupational health & Safety Assessment Standard – 18001)Certification



Educational Qualifications:-
o Diploma in Mech. Engg. (I.E.R.T, Allahabad)
o Post Diploma in Industrial Safety (R.L.I. Kanpur)
o Certified Lead Auditor for OHSAS-18001 by D.N.V,
Norway.
o Diploma in Industrial Hygiene (Annamalai Univ.)
o Specialized training course on Safety Management in Chemical Process Industry.
o M.Sc. Ecology and Environment Management, Sikkim Manipal University (Through Indian Instt. Of Envt. & Eco. New Delhi)

Experience: - TOTAL =21 YEARS

• As Supervisor in C.T.L. Pvt. Ltd. Allahabad (4 Years)
• As a App. Trainee in Bharat Pumps & Compressor Ltd. (1 Year)
• As Field Engineer Steel Structure in Hindalco Construction Division (6 Years)
• As Safety Officer in Hindalco Ind. Ltd. (10Years)
• Presently Working as Asst. General Manager (EHS) In Nalwa Steel And Power Ltd (O.P.Jindal Groups)From 1st April-2008


Nature of Jobs :- Hazop Study, Hazard identification, Safety Audit, Job
Safety Analysis, Implementation of OHSAS-18001,
Accident analysis and reporting
Organize Safety Training for Staff and Workmen.
Organize Health checking programme for Hazardous Process Exposure
Mock drill Training for emergency planning,
Improve Safety Awareness level etc.
Manage Environment legal compliance consent under air, water, safe disposal of hazardous waste, ETP &.STP.

Salary Drawn : Rs 86554/ PM {Rs10.40 Lack P/A CTC}

Salary Expected : Depending upon work culture, future prospect etc

Father’s Name : Shri K.M.Dwivedi
Date of Birth : [protected]
Nationality / Religion : Indian (Hindu)

PRINCIPAL RESPONSIBILITIES


Prepare Annual Occupational Environment Health & Safety operating Plan & Implementation To achieve Zero accident & Cleane environment
• Review and evaluate past performance and internal customer feed back to formulate the safety goal for coming year.
• Develop policy, objectives & updating.
• In corporate the statutory requirements.
• Define the activities and parameters to meet the goal.
• Develop action plan against each activities
• Monitor for its implementation by continuous review.

Hazard identification, Analysis & its control
• Identification of high-risk operations/activities/processes along with
Sr. Officers of plant.
• Selection of appropriate tools and techniques to address the risk.
• Employee training for the use of selected tools and techniques.
• Constitute a team for specific operations/process.
• Facilitate to the team about use of tools and techniques and evaluation for its effectiveness.
• Evaluation of risk through risk analysis -

Tools and techniques using
a. J.S.A. (Job Safety Analysis) b. HAZOP Study (Hazard & Operability study)
c. Fault tree Analysis d. Group Risk Assessment
e. Self Assessment Questionnaire
Internal Audit
• Constitute Audit team of Sr. Officers from different discipline (i.e. operation, mechanical, electrical, instrument & safety).
• Develop check list considering relevant attributes.
• Provide training to audit team members.
• Conduct audit as per check list.
• Recording of observations, discussion with concern Officers of Plant and preparation of time bound action plan for short term and long term (Engg. control/major modification) remedial measures.
• Re-audit to see implementation status and its review with plant head.
External Audit
• Coordinate with third party and finalized the contract.
• Make area wise schedule and its communication to officer concerned.
• Conduct audit as per schedule with external party.
• Preparation of action plan of audit observations after discussion with officer concerned.
• Monitoring of implementation status as per action plan.
Ensure Safety at Design Stage
• Visit the proposed site.
• Review the drawings & layout.
• Ensure integration of Statutory regulations.
• Ensure provision of in-built safety systems & instrumentation’s etc.
• Conduct regular inspection, HAZOP, Audit before start-up.
• Give clearance to start-up the plant.



Statutory compliance (compliance rules & regulations)
To ensure following regulatory coverage in the plant
Factories Act -1948, UP Factory Rule -1950
Gas Cylinder Rule –1981, Petroleum Act -1934
Explosive Act – 1984, MSIHC Rule – 1989
Indian Electricity Act – 1910, Indian Electricity Rule –1950
Indian Boiler Act –1923, E.S.I. Act –1948
W.C. Act – 1923 Environmement Protection Act-1986

Environment & Safety training (Create awareness)
• Identify need through questionnaire survey, appraisal, accident investigation etc.
• Organize & impart training as per need of plant.
• Get feed back for effectiveness of programs.

Emergency Preparedness (Minimize losses)
• Identifying the existing emergencies in coordination with concerned department head.
• Developing emergency plan and procedure.
• Employees training on emergency preparedness.
• Ensure availability of necessary emergency equipment.
• Conducting Mock drill (known/unknown) to find out gaps.
• Develop action plan to mitigate the gaps after discussion with officer concerned.
• Follow up for implementation of action plan to over come short comings.
• Inspection/checking of emergency equipment time to time to ensure its functioning.
• Review and updating of emergency plan considering new hazards.

Chemicals storage & Handling
• To identify chemicals, make list & updating.
• Prioritize them according to risk/consequences.
• Educate the employees about safe storage & handling as per the MSIHC rule.
• Monitoring.

Occupational Health check-up & work environment monitoring (for healthy work environment)
• Conduct work place environment monitoring (i.e. dust, gas, noise, illumination etc.) as per OHSAS-18001 norms.
• Make action plan for engineering control & implementation.
• Identifying high exposure area to occupational health/ergonomics.
• Preparation of health check-up schedule in coordination with Doctor concerned and area in-charge.
• Ensure the releasing of workmen from concerned areas on priority basis.
• Give feed back to plant heads about health condition of the employees.
• Make action plan for engineering control and implementation.

Accident Investigation & Reporting
• Verification of accidents through first-aid and also by direct communication from plant.
• Constitute investigation team from different discipline (i.e. Operation, Mech., Elect., Inst. & Safety)
• Identifying the root cause of accident through why- why/fault tree analysis.
• Discussion and emphasizing for Engineering control to avoid recurrence.
• Preparation of report and circulation to officer concerned.
• Reporting as per statutory requirements.
• Follow up for recommended control measures and review with plant head.


Environment Health & Safety committee Meeting (Ensure involvement of employees)
• Constitute safety committees at section as well as plant level.
• Conducting meeting in the chairmanship of Sr. Officers of plant.
• Review of implementation status of previous minutes.
• Review the implementation status of inspection, audit observations.
• Review the accident analysis report and its Engineering Control measures.
• Follow up for implementation of suggestions came in meeting.
• Conducting annual safety meeting at plant level.
• Preparation of report

Safety Week/Camp & Environment Day, Earth Day Celebration
• Deciding type of competitions to be organized in coordination with plant chairman committee.
• Constituting different teams for different competitions from different disciplines and provides training to them.

J.S. A.Competition
• Identifying accident prone activities on basis of past accidents and experience
• Facilitate to team to find out Engg. Control as a preventive measures and secondary protections also

HAZOP STUDY Competition
• Identifying hazardous processes
• Facilitating to team to find out scope for design improvement/modification and instrument control measures

Other Environment & Safety competitions
• Quiz Poem, Speech, Slogan, Poster, Waste Management (3 R) etc.

Ensure Use of PPEs at job site (For creating safety culture)
• Identification of appropriate PPEs based on the hazard by conducting risk assessment, accident analysis and discussion with Sr. officers.
• Advise for adequate PPEs.
• Ensure availability of PPEs at shop floor..
• Create awareness among employees about importance of PPEs
• Periodical assessment to ensure effectiveness of PPEs
• Ensure proper distribution and use of PPEs for cost effectiveness.
• Periodical inspection.







(Sunil Kumar Dwivedi)

Respected Sir,
I Have complited B.Tech In Mechanical Engineering in 2007 and I have two year Experince in production department, presently working in Pradeep Transcore Pvt ltd naini allahabad, I want to start my carrier with your company as your desired job Profile .
I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad

Please respected sir i Jitendra Patap Singh B.TECH. CHEMICAL ENGG. as praset job in guljag industry

Dear Sir,

With reference the job for Excise deptt, present time I am working with Infrastructure Project Ltd.Hyderabad.

I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad".

Dear Sir,
With reference the job for Excise deptt, present time I am working with Infrastructure Project Ltd.Hyderabad.as a Sr. officer Excise

I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad".

Respected Sir,
I Have complited B.Tech In Mechanical Engineering in 2007 and I have two year Experince in production department, presently working in Pradeep Transcore Pvt ltd naini allahabad, I want to start my carrier with your company as your desired job Profile .
I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad

Hi sir,
I'm going to complete my B.Tech (mechanical engg.) in july-2010, with current aggregate marks of 74.5%.
Moreover I want to start my career run with your flag in my hand.So I request you to provide me an opportunity.

Thank You.

Hi sir,
I'm going to complete my B.Tech (mechanical engg.) in july-2010, with current aggregate marks of 66%.
Moreover I want to start my career under your guidance.So I request you to provide me an opportunity.

Thank You.

Hi sir,
I'm going to complete my B.Tech (mechanical engg.) in july-2010, with current aggregate marks of 63.3%.
Moreover I want to propell my career with your name .So I request you to provide me an opportunity.

Thank You.

Hi sir,
I'm going to complete my B.Tech (mechanical engg.) in july-2006, with current aggregate marks of 64.98%.
Moreover I want to propell my career with your name .So I request you to provide me an opportunity

Hi sir,
I'm going to complete my B.Tech (mechanical engg.) in july-2006, with current aggregate marks of 64.98%.
Moreover I want to propell my career with your name .So I request you to provide me an opportunity

Dear Sir,

With reference the job for UTILITY dept., present time I am working with ION EXCHANGE INDIA LTD DELHI from three years.and My qualification is Diploma Mechanical & i have done my diploma in 2007 from I.E.R.T. ALLAHABAD.

I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad

sir i want do summer training, i am a student of mechanical engineering

respected sir,
i want to do my summer training in your prestigious institution during may 2011, how could i apply for it..

SONU METAL DISTRIBUTORS
11/1, CHANDRA BHAVAN, 1ST PARSIWADA, C.P.TANK,
MUMBAI-400004

Ref : SMD/2005/2010-11 Date : 02/12/ 2010.
To,
THE MATERIALS MANAGER ( PURCHASE DEPT )
Mr. Balvindar ji

Sub : - Manufacturers of Flanges & Pipe Fittings.
Stainless Steel and Carbon Steel Pipes, SS and MS Plates.

Dear Sir,

We take this opportunity to Introduce ourselves as a leading manufacturer of Stainless Steel Pipes and tubes in India of both Seamless and ERW, and also for Boiler and non – Boiler applications. We manufacture these in variety of compositions that are consistent with International Quality specifications. The Pipes are manufactured in SS-304, 304L, 309, 310S, 316, 316L, 316-Ti, 317, 317-L, 321, 347, and High alloy materials like SS-904 & SS-904-L. We manufacture as per International standards such as BIS, ASTM, DIN and SAE, etc.

We also deal in Stainless Steel Plates and Coils, Structural Steels, Hastalloy, Inconel, Nickel, and Titanium.

Our products undergo severe Quality Control Tests such as Tensile Testing, Eddy Curent Testing, Visual Testing, Hardness Testing, Hydro Testing etc. These tests ensures Quality of our Pipes and are approved by the Third Party Inspection Agencies like Llyods, EIL, PDIL, UDHE, TOYO, BV, PDIL, TATA, H&G, DALAL, FEDO, IDEA, KPG, TICB, DNV, MECON, ETC.













SONU METAL DISTRIBUTORS


-:2:-

Apart from these items we deal in Stainless Steel and Mild Steel Plates from SAIL, JINDAL, and Overseas manufacturers from Europe & USA.

We also deal in Haste alloy, Incoloy, Monel, Nickel, Copper, Titanium, and Other Exotic Materials in form of Pipes, Fittings, Plates, and Sheets. These materials are imported from the overseas manufacturers like Krupp VDM.

We provide Excise gate pass to avail the MODVAT benefit.

We have been associated with many Projects in India and Abroad. In India we have been regularly supplying to leading organizations in both Public and Private Sectors in India like Indian Oil Corporation, NTPC, National Aluminium Company in Public Sector and Reliance Group Of Industries, Brila Group Of Industries etc in Private Sector. We are also suppling to the other leading and small Industries like Sugar Mills, Paper Mills, and the other leading Process Industries. Overseas we have been supplying to Turkmenistan, Bangladesh, Nepal, Mauritius, and Kenya etc.

We are very keen to supply our range of products to your esteemed organization and therefore look forward for a long – term relationship for mutual benefit in the business.

We are enclosing herewith our company profile in short for your reference.

Thanking you and assuring our best services for all times.

Yours faithfully,
For SONU METAL DISTRIBUTORS


LALIT JAIN













SONU METAL DISTRIBUTORS
Range of our products.

Pipes (ERW and Seamless – SS/CS/MS)

Size : ¼” to 48”

Fittings (Seamless/ERW/IBR/Non IBR/ Forged/ But Weld/
Secrewed/ Scoket Weld – In SS/CS/MS).

Size : ½” to 52”

List of Companies we dealin.

Products Source

M S Pipes (ERW) Maharstra Seamless Ltd
Tata, Jindal, Zenith.

S S Pipes (ERW) DoungShing – Korea
Sumitomo – Japan

C. S. Pipes Seamless Maharastra Seamless Ltd
Indian Seamless MT

SS Seamless Pipes Sumitomo – Japan
Nippon - Japan
SAMI Steel Korea,
Avesta Palarit, Finland

S. S. Sheets/Plates (SS 304, Jindal – India
304-H, 304-L, 316, Avesta – Sweden
316-L, 316-Ti, 317, KRUPP – Germany
317L, 309, 310, 409-MM JAI – Marshall – USA
410, 904, 904-L etc Grades) Acernox, Stemcor.

MS Plates/BQ Plates SAIL (INDIAN)
Imported (Germany/Italy)

Alloy Steel Plates Imported/ SAIL

Alloy Steel (High Temperature) Indian Seamless/Imported
(With IBR certificates)

L.T.C.S. Pipes & Tubes Indian Seamless/ Imported

S. S. Pipes – Seamless/ERW Manufactured By us.
(Welded)



SONU METAL DISTRIBUTORS





Please note that we specialize in SS-904/SS-904L Pipes.

SS / CS Fittings All types Elbows, Flanges,
Reducers, Stub ends, TEE,
Blinds, Bends, Nipple,
Couplings, Lap Joints, Caps,
Union etc. (INDIAN)

TMT Bars/ Structural Steel Indian Make


Apart from these items we also deal in Exotic materials like
Haste alloy, Incoly, Titanium, Monel, Nickel, etc. In Pipes,
Fittings, Plates, and Sheets. These materials are imported from
Our overseas principals (Manufacturers) like Krupp, VDM,
Acernox, Avesta Polarit etc.
















COMPANY PROFILE

Name of company : M/s. SONU METAL DISTRIBUTORS


Address - Reg. Office : 11/1, CHANDRA BHAVAN,
1ST PARSIWADA LANE,
Mumbai – 400004.


Telephone Nos. : +[protected] / 6636 3222.


Fax No : +[protected]


Contact Person : 1) Mr MANOJ SHUKLA
Cell : +91 [protected]




E – mail : [protected]@gmail.com

Website : www.sonumetal.com

Year of Establishment : 19


Items Manufactured : Stainless Steel Pipes/ Pipe Fittings
(MS/CS/SS/LTCS) & Alloy Steels with
IBR and Non – IBR.

Sales Tax No : C. S. T. No : [protected]V DT.
B. S. T. No : [protected]C DT.


Authorized Stockist Of : Maharastra Seamless.
ISMT.
Jindal.
SAIL.
Imported.


Our Banke’s Name : Kotak Mahindra Bank, Nariman Point.
Bank of Baroda, Khetwadi Brach.


SONU METAL DISTRIBUTORS






Qualtiy Control Norms:

Tensile Testing.

Hardness Testing.

Hydro Testing.

Chemical Compostions Testing of the Raw Material.

Radiography.

Dimension Inspection.

Visual Inspection of Raw Material and Finsihed Goods.



















CLIENTS LIST


COMPANY’S NAME LOCATION.

1) M/s. Gogayl MG Gases Pvt. Ltd. Delhi.

2) M/s. Hatson Agro Products Pvt. Ltd. Belgaum.

3) M/s. Ovenman Industries Pvt. Ltd. Faizabad.

4) M/s. E & Projects Pvt. Ltd. Ghaziabad.

5) M/s. Hindustan Construction Co. Mumbai.

6) M/s. North Delhi Power Ltd. Delhi.

7) M/s. Hindustan Construction Co. Kondekulam.

8) M/s. Food Fats & Fertilizers Pvt. Ltd. Andra Pradesh.

9) M/s. Vaniko Ltd. Bulgaria.

10) M/s. Reliance Industries Hazira.

11) M/s. Nirma Ltd. Bhavanagar.

12) M/s. Nirma Ltd. Mehasana.

13) M/s. Hindustan Lever Ltd. Goa.

14) M/s. Rallis India Ltd. Ankleshwar.

15) M/s. Indian Rayon and Industries Ltd. Mumbai.

16) M/s. Lupin Labs Ltd. Mumbai.

17) M/s. Sun Pharmaceuticals Ltd. Ankaleshwar.

18) M/s. G. B. Engineering Ltd. Trichi.

19) M/s. Cethar Vessels Pvt. Ltd. Trichi.

20) M/s. Larsen & Turbo Ltd. Mumbai.

21) M/s. Madras Aluminium Company Ltd. Mettur.

22) M/s. Indian Oil Corporation Ltd. Mathura.

23) M/s. Godrej & Boyce Ltd. Mumbai.
24) M/s. Birla Copper Ltd. Dahej.

25) M/s. Orient Paper Mills Ltd. Amlal.

26) M/s. Servall Engineering Ltd. Coimbatore.

27) M/s. Danalakshmi Paper Mills Ltd. Madurai.


28) M/s. Asian Paints. Mumbai.

29) M/s. Colgate – Palmolive India Ltd. Baddi, Solan.

30) M/s. Larsen & Turbo. Andheri, Mumbai.

31) M/s. Rampur Engineering Co. Ltd. Delhi & Rajasthan.
32) M/s. Hiemens Bottling Machines. Faridabad.

33) M/s. Bhushan Steel & Strips Ltd. Mumbai.

34) M/s. Nuclear Power Project Ltd. Kundalkulam.
35) M/s. Reliance Chemotex Industries Ltd. Udaipur.
36) M/s. Hindustan Copper Ltd. Jharkhand.
37) M/s. Essel Mining & Industries Ltd (Aditya Birla Group). Vapi, Gujarat.
39) M/s. Shreyans Industries Ltd (Paper Unit). Ahmedgarh.
40) M/s. Shreyans Rishab Papers Ltd.

Dear sir,
I have 13th year experience in Logistics Rail/Road, Presentaly i am working with ACC Limited, Chandrapur M.S MY BIRTH PLACE IS ALLAHABAD, I am intrested to work with Reliance Group Naini Allahabad, 2005 to 2007 i was with Reliance Logistics Limited, Bilaspur C.G as Branch Incharge, Please give me a chance,

Thanking You
Regards.
Anil Tiwari
[protected]
[protected]

Dear sir,
this is Mr.Ramgopal working Asa safety steward at Visakhapatnam's L&T limited from 4 years pl give me a chance to me to prove my self my qualification is M. Sc, P.G.D.H.S.E(pursuing).in NIFS Visakhapatnam's branch

dear sir
my name is Shesh nath pandey, i am pursuing hardware networking cores in jetking

tell me about relince survey

hello. my self vishal singh i have completed hardware networking from hcl institute of networking allahabad course, microsoft certified it professional, CCNA...
i want to start my career from your company pleadge give me chance to work in your company ...


thank you, , ,

sir

Respected Sir,
I Have completed intermediate in 2008 and I have three year Experience in production department, presently working in Harmony Yarn Pvt.ltd kim surat, I want to start my carrier with your company as your desired job Profile .
I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad

Respected Sir,
I Have complited B.Tech In Mechanical Engineering in 2008 and I have two years Experience in Industrial Engineering department and One year experience in Maintenance department in same company, presently working in Mather and Platt Pumps Ltd, Pune, Maharashtra. I want to start my carrier with your company as your desired job Profile .
I hope you will give me a chance to prove myself in "Reliance Industries Limited, Allahabad Manufacturing Division, Naini, Allahabad, UP.

Dear Sir/ Mam,
I hereby interested making fortune in your organization. I think determination, dedication, and hard work can help to achieve one’s desired goals in life. I can also work with machines confidently with others even under pressure. Initially, if I am selected for this position, I am very sure to utilize all my knowledge for this position.
I have attached my resume for your reference. I am looking greatly & welcome for any question to present my latest & better in front of you. You can call me at any time.
I am reachable via—
Contact No:- [protected] / [protected] Mail Id: [protected]@yahoo.com

Thank you for your time and consideration.

Sincerely,

ASHISH GUPTA
ALLAHABAD
UTTAR-PRADESH
INDIA

sir,
I am Ashutosh Kumar Srivastava B.Tech student in INDIAN INSTITUTE OF CARPET TECHNALOGY BHADOHI U.P .I am intrested your industry.My trainning has been completed in 2012 in NAHAR INDUSTRIES in cotton spinning and pc blend spiining.iam also trained in woolen spinning in MAMB WOOLEN MILL BHADOHI.my degree has been completed in 2013 june.so i request to you please provide oppertiunity in your industry.

please inform me as soon as my degree has been completed.

THANYOU
ASHUTOSH KUMAR SRIVASTAVA
Contract no.[protected]

GANESH METAL AND ALLOYS
G-66, HEXZONE ARCADE VALIA ROAD NEAR
JAYABEN MODI HOSPITAL GIDC ANKLESHWAR-393002

Ref: GMA/Date: 07/02/ 2015.
To,
THE MATERIALS MANAGER (PURCHASE DEPT)
Mr.

Sub: - Manufacturers of Flanges & Pipe Fittings.
Stainless Steel and Carbon Steel Pipes, SS and MS Plates.

Dear Sir,

We take this opportunity to Introduce ourselves as a leading manufacturer of
Stainless Steel Pipes and tubes in India of both Seamless and ERW, and also for
Boiler and non – Boiler applications. We manufacture these in variety of
compositions that are consistent with International Quality specifications. The
Pipes are manufactured in SS-304, 304L, 309, 310S, 316, 316L, 316-Ti, 317,
317-L, 321, 347, and High alloy materials like SS-904 & SS-904-L. We
manufacture as per International standards such as BIS, ASTM, DIN and SAE, etc.

We also deal in Stainless Steel Plates and Coils, Structural Steels, Histology,
Inconel, Nickel, and Titanium.

Our products undergo severe Quality Control Tests such as Tensile Testing, Eddy
Curent Testing, Visual Testing, Hardness Testing, Hydro Testing etc. These
tests ensures Quality of our Pipes and are approved by the Third Party
Inspection Agencies like Llyods, EIL, PDIL, UDHE, TOYO, BV, PDIL, TATA, H&G,
DALAL, FEDO, IDEA, KPG, TICB, DNV, MECON, ETC.

GANESH METAL AND ALLOYS

Apart from these items we deal in Stainless Steel and Mild Steel Plates from
SAIL, JINDAL, and Overseas manufacturers from Europe & USA.

We also deal in Haste alloy, Incoloy, Monel, Nickel, Copper, Titanium, and
Other Exotic Materials in form of Pipes, Fittings, Plates, and Sheets. These
materials are imported from the overseas manufacturers like Krupp VDM.

We provide Excise gate pass to avail the MODVAT benefit.

We have been associated with many Projects in India and Abroad. In India we
have been regularly supplying to leading organizations in both Public and
Private Sectors in India like Indian Oil Corporation, NTPC, National Aluminum
Company in Public Sector and Reliance Group Of Industries, Birla Group Of
Industries etc in Private Sector. We are also supplying to the other leading
and small Industries like Sugar Mills, Paper Mills, and the other leading
Process Industries. Overseas we have been supplying to Turkmenistan,
Bangladesh, Nepal, Mauritius, and Kenya etc.

We are very keen to supply our range of products to your esteemed organization
and therefore look forward for a long – term relationship for mutual benefit in
the business.

We are enclosing herewith our company profile in short for your reference.

Thanking you and assuring our best services for all times.

Yours faithfully,


For
GANESH METAL AND ALLOYS

DEEPAK PATEL +91-[protected]

[protected]@gmail.com


GANESH
METAL AND ALLOYS
Range of our products.

Pipes (ERW and Seamless – SS/CS/MS)

Size : ¼” to 48”

Fittings (Seamless/ERW/IBR/Non IBR/ Forged/ But Weld/
Secrewed/ Socket Weld – In SS/CS/MS).

Size: ½” to 52”
List of Companies we dealin.

Products Source

M S Pipes (ERW) Maharashtra Seamless Ltd
Tata, Jindal, Zenith.

S S Pipes (ERW) DoungShing – Korea
Sumitomo – Japan

C. S. Pipes Seamless Maharashtra Seamless Ltd
Indian Seamless MT

SS Seamless Pipes Sumitomo – Japan
Nippon - Japan
SAMI Steel Korea,
Avesta Palarit, Finland

S. S. Sheets/Plates (SS 304, Jindal – India
304-H, 304-L, 316, Avesta – Sweden
316-L, 316-Ti, 317, KRUPP – Germany
317L, 309, 310, 409-MM JAI – Marshall – USA
410, 904, 904-L etc Grades) Acernox, Stemcor.

MS Plates/BQ Plates SAIL (INDIAN)
Imported (Germany/Italy)
Alloy Steel Plates Imported/ SAIL
Alloy Steel (High Temperature) Indian Seamless/Imported
(With IBR certificates)
L.T.C.S. Pipes & Tubes Indian Seamless/ Imported
S. S. Pipes – Seamless/ERW Manufactured By us.
(Welded)


GANESH METAL AND ALLOYS


Please note that we specialize in
SS-904/SS-904L Pipes.
SS / CS Fittings All types Elbows, Flanges,
Reducers, Stub ends, TEE,
Blinds, Bends, Nipple,
Couplings, Lap Joints, Caps,
Union etc. (INDIAN)

TMT Bars/ Structural Steel Indian Make

Apart from these items we also deal in Exotic materials like
Haste alloy, Incoly, Titanium, Monel, Nickel, etc. In Pipes,
Fittings, Plates, and Sheets. These materials are imported from
Our overseas principals (Manufacturers) like Krupp, VDM,
Acernox, Avesta Polarit etc.


COMPANY PROFILE

Name of company: M/s. GANESH METAL AND
ALLOYS
Address - Reg. G-66,
HEXZONE ARCADE VALIA ROAD

NEAR JAYABEN MODI HOSPITAL GIDC
ANKLESHWAR-393002
Telephone Nos. : +[protected] / 220127.
Fax No: +[protected]
Contact Person: 1) Mr. DEEPAK PATEL
Cell: +91 [protected]
E – mail: [protected]@gmail.com
Website: www.ganeshmetalalloys.com


Year of Establishment: 1998
Items Manufactured: Stainless Steel Pipes/ Pipe Fittings
(MS/CS/SS/LTCS) & Alloy Steels with
IBR and Non – IBR.

Sales Tax No: G. S. T. No: [protected] Dt.[protected]
C. S. T. No: [protected] Dt.[protected]

Authorized Stockiest Of: Maharashtra Seamless.
ISMT.
Jindal.
SAIL.
Imported.


Our Banke’s Name: Bank Of Baroda,
Branch. Center Point.Bharuch, Ankleshwar

GANESH METAL AND ALLOYS
Quality Control Norms:
Tensile Testing.
Hardness Testing.
Hydro Testing.
Chemical Compositions Testing of the Raw Material.
Radiography.
Dimension Inspection.
Visual Inspection of Raw Material and Finished Goods.

Dear sir

with due respect I beg to say that through reliable resources it is known to me that some vacancies are in your factory I offer myself as a candidate for the same with biodata along with the application .
I assure you best of my services if selected.

Acadamic qualification
bachelor of technology in electrical engineering 68.54 from uptu lucknow
10 + 2 from u p board allahabad 75.8 % in 2005
10th from up board allahabad with 71 % in 2003

technical skills

proficient with

erection of plant
good knowledge of project
sap system
outlook express
ms office
Internet and blogging
energy report


current profile

working as shift electrical engineer in sanatan textile limited silvassa gujarat from march 11, 2013 to till now

company profile

sanatan textile is one of the leading manufacturing company of textile like setting up of partially oriented yarn and fully drawn yarn with a capacity of 225000 tpa using continuous polymerization process and a captive power plant of 12.9 mega watt using natural gas as a standby power

job profile

making regular checks on machinery according to schedule
attending and repairing breakdown on making machines and equipments checking and calibrating instruments
replacing part on equipment as part of routine maintenance plan
design and construct a special control panel jigs and fixtures
assist with machine and tool improvements on processing equipments
assist with machinery and equipment installation
assist with mechanical and electrical improvements to plant and equipment forward planning of resource requirements

previous experience

worked as an electrical engineer in n r agarwal industries limited vapi valsad gujarat from july 9, 2010

company profile

n r agarwal industries limited is one of the largest coated duplex board and newsprint manufacturing group having its corporate office at mumbai and food manufacturing unit located at vapi gujarat

worked as electrical engineer in cg foods india private limited pantnagar rudrapur uttarakhand from august 13, 2012 to march 10, 2013

company profile

cg foods india private limited is one of the leading manufacturing company of food products like noodles and snack foods in the east and north east part of india the group owns WAIWAI & KWIK brands in fast food

drawn salary

2.4 lakhs per annum + accommodation


area of interest and training

machine and transformer
training from AREVA T&D allahabad of lv hv and tap winding of power transformer


Thanks & Regards
Manas Pandey[protected]

I take a retailer no.([protected]) on[protected] which pin code no. is not available please give me my pin code no. soon

sir/madam maine aapke counter pankaj electric & communication firojpur jhirka distt. (mewat) se ek retailer no. [protected] liya tha . maine yeh no.[protected] ko liya tha . mere counter ka naam sanjay communication hai. mere is retailer no. ka pin code mujhe abhi tak nahin mila hai jiske karan main customer ke mobile main recharge nahin kar pa raha hoon . please mujhe mera pin code jaldi se jaldi diya jaye taki main customers ko service de sakoon.
thanking you
Nitin Gupta
[protected]

PLEASE ACTVATE MY GPRS

OR SEND MY GPRS SETTING

MY Mobile No. Is

[protected]

how can i activate my gprs send me the configuration settings
my no is [protected]

please activate my gprs on [protected]

please remove all the services like voice chat etc on number [protected]

please remove all the services like voice chat etc on number [protected]

MY NUMBER IS [protected]
PLEASSSSSSSSSSSS SUSCRIBE MY GGGGGGGGGPPPPPPPPPPPRRRRRRRRRRSSSSSSSS

PLEASE ACTVATE MY GPRS

OR SEND MY GPRS SETTING

MY NO IS [protected]

please activate gprs on my mobile.
My mobile number is [protected]

pleease activate my gprs my phone no [protected]

PLEASE ACTIVE MY GPRS.

MY MO. NO. IS [protected]

sir i have send mms and mms settings around 25 days ago but now also im not finding GPRS SETTINGS on my mobile so pls sens as fast as so plzzzzzzzzzzzzzz my no is [protected]

Reliance Industries Limited — PF transfer issue

Dear Sir/Mam,

I have asked For transfer of PF from

HCL Comnet Ltd PF DL/19092/2647 Hcl technologies to Pension A/c No.: MH/VASHI/117605/543 Reliance retail Limited

Its still not done for the past 6 months all the forms are submitted 6 months back

regards

Binoj Balachandran

reliance

How to active GPRS In chiana Mobile.
My Mobile Modal - SIGMATEL FXD S400

SL No. - IMEI:[protected]
IMEISV:78

i need a job your company

meeeeeeeeeRa gprs chalu karo Plssssssssssss

[protected]

please activate gprs on my mobile.
My mobile number is [protected]

please activatemy gprs my no. is [protected]

Reliance Industries Limited — PF NOT GIVEN TILL DATE

DEAR ALL,

PLEASE NOTE THAT I "JASPREET SINGH" WORKED FOR RELIANCE FRESH IN CHANDIGARH FROM 20.09.2006 TILL 19.09.2008 BUT TILL DATE MY PF HAS NOT BEEN GIVEN TO ME ALTHOUGH THE FORMS WERE SENT TO COURIER AFTER GETTING IT CHECKED FROM HR.

MY EMPLOYEE ID:: 50000054 AND[protected]PUNJAB OFFICE: CHANDIGARH)

PLEASE RELEASE THIS ASAP.

REGARDS

JASPREET SINGH
[protected]

please activate gprs on my mobile.
My mobile number is [protected]

PLEASE ACTVATE MY GPRS

OR SEND MY GPRS SETTING

MY NO IS [protected]

Reliance Industries Limited — not recieved dividend yet

I have not recieved dividend of 26 shares of reliance industries ltd. @ 13 Rs. per share.And not having any information about it till now.

please give me the gprs setting for my handset Nokia N72. I send the sms to the (all) (55100) its reply your handset information not in database & also I could not contact to the customer care.

please give me the gprs setting for my handset Nokia N72. I send the sms to the (all) (55100) its reply your handset information not in database & also I could not contact to the customer care. My Mobile no. is [protected]

sanjay namdeo kadam — status of loan amount

sir
My Loan A/C NO. 43002763 & Appl. No. 602972
I want to know my loan account details pl. send me on my mail
Thanks..........

Reliance Industries Limited — Loan balance inquiry

Sir/Madam,
I want to know how monch lone amount balance which I pay to you,
My details as follows.........

1) Loan amount :---- 2,00,000 (tow lakh)

2) Loan A/c No. :---- 43002763

3) Appl. No. :----- 602972

Reliance Industries Limited — bonus share

i have 20 shares RIL holding in physical form folio no.[protected] i have not recieved bonus share till date
rekha jain
1339, vaidwara, chandni chowk,
delhi-110006

dividend not received for the year 2011/2012
ref:folio numer:1060190, number of shares 126, unit: reliance industries limited.
Account Sanjay Nandy
N-264, Fatehpur 2nd Lane, P.O:Garden Reach, Kolakata : 700 024.
Email:nandy.[protected]@yahoo.com

Reliance Industries Limited — Bonus Share not Received as yet

Hi,
I am having reliance shares in physical form. I have not received the bonus shares issued by RIL. whome should I need to contact

this complaint is against bharat Petrol and not on any other firm .
the details asked in the submit complaint to be clearly write the company to whom we are lodging complaint or company we are working
I need to take back this complaint as this is causing confusion

The complaint is against Bhatat Petrol and not on any other .
the site should have clear mentioned the company name on which you want to register complaint or you are working with .
also need provision to take back the complaint .
I would like to take back the complaint as this is creating confusion .
DIlip Kulkarni

take action as soon as possible it is loss of coustumer rights

Individual — Pathetic Condition of Vikhroli Station junction on LBS Road

Dear Concerned officer, I have been travelling on the LBS road, crossing the Vikhroli station junction for years together. The road in that patch, right at the junction is so uneven and it has been that way for years now. The vehicle literally has to go up and down, crossing that patch. It impedes the vehicular movement drastically. The rate of vehicles crossing the signal comes down substantially thus not only causing traffic but also wasting precious fuel. All that needs to be done on that less than 5 meter patch is to level that road. It will smoothen the traffic and save lot of commuter agony. It is sad to see the continuation of the apathy where with some minor will, things can change for the better. Hopefully this will be done soon. Regards,

Reliance Industries Limited — I need the details of my postpaid phone bill on mail

srinibas mohapatra
qr no 5r/1, sales tax colony
daula sahi, tulsipur
cuttack
orissa