[Resolved]  Asian Paints — for recommending a wrong product!

Dear asian paints,

My name is kencho and i am from bhutan. I am looking for an arbitrator within the asian paints, who will not take side of their employee because i feel that the customer care people and the technical team is colluded and i am not getting enough support. Due to which i request for some honest concerned personnel of asian paints to solve my problem. My story was that i was looking for a paint material, which can replace the tile on the walls in the shower area of the bathroom for some design concept. I have contacted pranabesh sarkar, cso-newb, tel: [protected] of asian paints and he confidently advised me to go for satin enamel paint along with other waterproofing materials and with instruction on application. With due diligence, i have followed his advice. Everything seemed fine until on the first day, we have operated the shower and within no time some parts of the wall has started to form blisters, which then i have immediately informed the dealer in jaigoan and pranabesh himself. He then told me that he misunderstood and thought i will be doing half wall tile and remaining wall will be paint where there's no contact with water. He kept saying that if he had understood that i am going to go for full paint on the wall then he wouldn't recommend in the first place. I have responded to his argument that if i am to do half wall tile and half paint, which the system already exist then why do i need to contact a company tech personnel in the first place? After visiting the site, he then advised me to go for apex ultima, which i had to bear the labour charges besides the inconveniences caused from the rectification work but i did warn him that if it fails again then the company will have to take the responsibility and as predicted it failed. When i filed another complaint asking to compensate then yesterday i got a response from a customer care services, which made me belief that pranabesh was actually aware of my request. So meaning all this time his reasoning on misunderstanding was just an excuse to escape. The customer care then tells me that i haven’t followed pranabesh’s full advise in doing a skirting on the wall either with net cementing or tile (Another story he lied) due to which the moisture was trapped and has caused the blister.in this regard can anyone tell me that the maximum height of 150 mm skirting can actually give the protection in the bathroom wall when the water is vertically falling from the shower head and is splashed all over the wall while taking a shower? Don’t you think that the moisture can seep from any part of the wall as long as there’s some porosity? This didn’t sound any logic to me. What i have realized was none of the asian paint products are manufactured to withstand such high pressure from the falling water, overcome huge generation of moisture from the steam of hot water. The first reason i got from pranabesh was that satin enamel was non-porous due to which the moisture was trapped within and the blister was formed. If moisture is the main culprit then why in the first place he recommended it? Everyone knows that there’s high moisture content in the shower area and that was the main reason why i have contacted asian paints if they have any such product, which can withstand any amount of moisture and can replace the tile. Secondly he thought that apex has porosity, it will breath out the moisture but this concept proved to be wrong as well.

Fyi, i have informed that i was not advised in doing the skirting in the first place and the details of his email instruction was sent to customer care as a proof.

I now feel that the particular team is taking a free ride on the expenses of the client and at the same time i felt that i am being used like a guinea pig. All i wanted was to compensate over the paint product, i have bought for the bathrooms and to refund the labour charges. But it seems that asian paints or the particular group of people are not going to reach my grievances to the genuine people of asian paints who actually cares about their customers and i had to take the resort of complaining it here.

It’s now running into the third month since i have complained and so far i didn’t get any concrete support from the team i have contacted. So if there’s any honest employee of asian paints here then please respond to my grievances to which i have more to share with an evidences.

I was assigned by a ticket # [protected] and to quote in any future correspondences.

Kencho
Thimphu bhutan
Email:[protected]@gmail.com
Contact: +[protected]
Was this information helpful?
No (0)
Yes (0)
Sep 7, 2019
Complaint marked as Resolved 
Asian Paints customer support has been notified about the posted complaint.
Aug 06, 2019
Updated by Kencho
I am not satisfied with the responses received from the customer care of Asian paints and i don't know how long do i have to wait here on consumer platform. However, i feel that it will be the same team who has responded to me in email who will also respond here. Therefore, i have decided to post their email whereby in one email, no instruction of skirting was mentioned but the other email they talk about as being advised under serial no. 1.
I am also posting the pic of my bathroom circled in blue was the issue I am facing and the arrow pointing down was the silicone work done i have done, which I have explained below. This will be the proof from a client’s side that the issues raised was genuine and also a proof on how poorly Asian paint customer care responds. This will also be a caution to the entire future client, who will give a second thought before buying their product and believing in their so called tech team.

They keep repeating their response and instruct me to do what they THINK has caused the problem but they are not confident or sure. They keep telling me that the blister was due to the moisture content and i find them stupid to say this because the area is in the shower and definitely there will be higher moisture content, which is why i have contacted Asian tech people in the beginning, if they have any such product which can withstand such moisture. Further they tells me that the moisture content on the wall was 20-25% at the time of inspection but did the person who have inspected the area even crossed his mind that at the time of his visit the shower was freshly used and the floor was found wet?

I am also clueless that the customer care department keeps repeating that without the skirting there may have been a leak between the joints of the wall and the floor tile. They are also reasoning that because the silicone was used as a sealer between the gaps, they THINK water seeped through the silicone. I had a big laugh!!!

To this I have informed that the tiles are firstly inserted 20 mm deep inside the wall and then all the gaps were filled with the bonding. Because of the stain from the bonding the edge was looking dirty so we had to use a stretch of silicone which can also act as water proofing and give a smooth edge look yet they have ignored to my explanation.

They themselves being the manufacturer of silicone, i am surprised to hear from them that silicone can't give protection. In fact I would say they are better than the Asian paints. Nowadays glasses pans are joined and sealed by the silicone where even an air can't pass through forget the water. My shower glass partition were also sealed by silicone on the gaps formed between the glass and the wall and there's no single drop of water which seeps from inside to the other dry areas.

If they are basing that the blister was formed due to poor work protection done on the supposed gap, then why didn’t their tech person objected when visited the site?? In fact he didn’t even ask me on silicone? All the while, he told me that he misunderstood that I will be doing half wall tile and half paint.

Also when the second rectification work was done, Pranabesh didn’t mention to remove the silicone and do the skirting. So why all of a sudden they are giving me all the baseless excuses?

Despite sending them an email proof that no skirting was advised, yet they are ignoring to read and told me that their team has advised. They keep instructing me that I should do a net cementing skirting on the base of the wall. I don’t see how a cement skirting can actually stop the water seeping inside the wall when cement wall has the highest porosity than any other materials available in the market. The current wall was plastered after that we did cement punning and then applied cement sealer and then applied rest of the products from Asian paints. Yet there’s a blisters formed randomly still they are telling me to do a cement skirting now and not wanting to believe that their product has failed or their employee has failed to do the due diligence. From my side, I tried to cooperate but with a condition that if it fails for the third time then will the concern will take the responsibility??? To this also they didn’t respond and simply tells me to do what they have instructed?? So definitely they are taking a free ride at my expenses. A BIG DISAPPOINTMENT AND DEFINITELY THIS SITUATION WILL BE MADE AWARE TO ALL MY COUNTRYMEN THAT ASIAN PAINTS IS FULL OF EMPTY PROMISES AND ONLY KNOWS HOW TO CHEAT PEOPLE.

Verified Support
Aug 07, 2019
Asian Paints Customer Care's response
Hi,
We are extremely sorry for the inconvenience caused to you.
We have already escalated your concerns to the relevant team, they will reach out to you with an update.
Sep 07, 2019
Updated by Kencho
Unfortunately my problem is not yet solved and here the status of my complaint has been marked as resolved...this is very strange. Your concerned team has been playing the game of a cat and mouse until today. After giving so much of time, they are still not able to solve the issue. The next step, i will have to do is sue the company.
Complaint comments 

Comments

Unfortunately my problem is not yet solved and here the status of my complaint has been marked as resolved...this is very strange. Your concerned team has been playing the game of a cat and mouse until today. After giving so much of time, they are still not able to solve the issue. The next step, i will have to do is sue the company.
Asian Paints Customer Care's response, Sep 9, 2019
Verified Support
Hi, we are sorry to hear about your unfortunate experience.
Kindly share your contact number via a private message. Our team will get in touch with you to understand and address your concern.
Kencho's [Complaint's author] reply, Sep 10, 2019
Your team in Siliguri has my contact details. Instruct them to do the needful at the earliest on the compensation part. Subrat +917381055557 and Pranabesh +919038672908

Post your Comment

    I want to submit Complaint Positive Review Neutral Comment
    code
    By clicking Submit you agree to our Terms of Use
    Submit
    Asian Paints
    customer care contact
    Customer satisfaction rating Customer satisfaction rating is a complex algorithm that helps our users determine how good a company is at responding and resolving complaints by granting from 1 to 5 stars for each complaint and then ultimately combining them all for an overall score.
    Read more
    78%
    Complaints
    873
    Pending
    196
    Resolved
    621
    Asian Paints Phone
    +91 22 3981 8000
    Asian Paints Address
    Asian Paints House 6A, Shantinagar, Santacruz (E), Mumbai, Maharashtra, India - 400 055
    View all Asian Paints contact information